Table Of Contents

Configuring the PXI Controller

Version:
    Last Modified: March 29, 2021

    1. Sign in to the ECUTS.
    2. Configure ethernet port 1.
      1. Press <Win+R> to launch Microsoft Run.
      2. Type ncpa.cpl in the text box and click OK.
      3. Right-click the Ethernet adapter.
      4. Click Properties.
      5. Double-click the Internet Protocol Version 4 (TCP/IPv4) option in the properties list.
      6. Select Obtain an IP address automatically and Obtain a DNS server address automatically.
      7. Click OK.
    3. Configure ethernet port 2.
      1. Press <Win+R> to launch Microsoft Run.
      2. Type ncpa.cpl in the text box and click OK.
      3. Right-click the Ethernet 2 adapter.
      4. Click Properties.
      5. Double-click the Internet Protocol Version 4 (TCP/IPv4) option in the properties list.
      6. Select Use the following IP address.
      7. Type 169.254.160.2 in the IP address text box.
      8. Type 255.255.0.0 in the Subnet mask text box.
      9. Click OK.

    Recently Viewed Topics