Clean ECUTS exterior surfaces with a dry
lint-free cloth or a soft-bristle brush. If any dirt remains, wipe with a cloth
moistened in a mild soap solution. Remove any soap residue by wiping with a cloth
moistened with clear water. Do not use abrasive compounds on any part of the test
Use the following
guidelines to avoid damaging the ECUTS when
cleaning the test rack exterior:
- Avoid getting moisture inside the system during exterior cleaning. Use only enough
moisture to dampen the cloth.
- Do not wash the front- or rear-panel connectors or switches. Cover these components
when cleaning the test rack.
- Do not use harsh chemical cleaning agents; they may damage the ECUTS. Avoid chemicals that contain benzene,
toluene, xylene, acetone, or similar solvents.