Table Of Contents

(ECUTS-16001) Replacing the USB Hub

Version:
    Last Modified: March 29, 2021

    Equipment

    • #2 Phillips screwdriver
    1. Power off the ECUTS-16001.
    2. Open the rear cabinet door.
    3. Disconnect USB cables from the USB hub.
    4. Disconnect the power from the USB hub.
    5. Remove the screws from the USB hub bracket using the #2 Phillips screwdriver.
    6. Remove the USB hub.
    7. Insert the replacement USB hub.
    8. Screw in the screws to the USB hub bracket using the #2 Phillips screwdriver.
    9. Connect the power to the USB hub.
    10. Connect the USB cables to the USB hub.

    Recently Viewed Topics