Filters a signal using a Butterworth highpass filter. Highpass filters pass high frequencies and attenuate low frequencies.
A Boolean that specifies the initialization of the internal state of the node.
True | Initializes the internal state to zero. |
False | Initializes the internal state to the final state from the previous call of this node. |
This node automatically initializes the internal state to zero on the first call and runs continuously until this input is True.
Default: False
Cutoff frequency of the filter.
Default: 0.125
Order of the filter.
Default: 2
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Default: No error
Sampling frequency in Hz. sampling frequency must be greater than zero.
This input is available only if you wire one of the following data types to signal:
Default: 1, which is the normalized sampling frequency
Error information.
The node produces this output according to standard error behavior.
Standard Error Behavior
Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.
Where This Node Can Run:
Desktop OS: Windows
FPGA: DAQExpress does not support FPGA devices
Web Server: Not supported in VIs that run in a web application