Table Of Contents

Verifying User Programs

    Last Modified: May 15, 2018

    Complete the following steps to change the mode to Operational Mode.


    Verify that the User Program responds as expected for all configured faults.


    Verify the safety response time for all configured faults.

    1. Open the LabVIEW Project (.lvproj) created to monitor the safety system.
    2. Right-click the module in the LabVIEW Project and select Properties.
    3. Click the Change Mode to button.
    4. Type verify and click OK.
    5. Verify the module mode has updated to Operational Mode in the Mode field.

    Recently Viewed Topics