IVI Switching Mode

The IVI Switch step type supports the following IVI switch operations:

• Connect/Disconnect —Connects or disconnects the Source and Destination channels in the switch instrument.
• Configure Scan —Configures the switch module for scanning.
• Start Scan —Initiates a scanning operation.
• Wait —Blocks operations until all switches debounce for an instrument.
• Configure Switch —Configures channels as Configuration or Source channels and configures specific paths between channels.
• Send Software Trigger —Sends a software trigger command to trigger the instrument during a scanning operation.
• Abort Scan —Cancels a scanning operation.
• Get Information —Retrieves low-level status and information from the instrument.