Configures the reference pulse waveform used for time sidelobe measurements.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Example:

    ""

    "signal::sig1"

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ccclst.png Reference Waveform —

    Reference Waveform specifies the reference waveform used for correlation computation in time sidelobe Measurements. The default value is an empty waveform.

  • cdbl.png x0 —

    x0 specifies the starting time of the reference waveform. This value is expressed in seconds.

  • cdbl.png dx —

    dx specifies the sampling interval of the reference waveform. This value is expressed in seconds.

  • c1dcsg.png y —

    y specifies an array of waveform samples of the reference waveform.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.