NI Video Measurement Suite

niVMS Hardware Configurator VI

  • Updated2023-08-17
  • 2 minute(s) read

niVMS Hardware Configurator VI

This VI is only available in the hardware API.

Displays the Hardware Configurator, but only if the hardware configuration file has already been initialized using the niVMS Initialise VI.   The Hardware Configurator allows the user to interactively detect, test, and configure all NI VMS hardware devices.  The Input Mode you specify must match the type of signals to be acquired.

Input Mode specifies digitizer configuration for nonvideo signals used only for camera auto iris and external sync measurements. The default value is normal video on both channels.

Normal Specifies a configuration of one or two channels of normal video
Video + AC (Non-Video) Specifies a configuration of normal video on the first channel and an AC-coupled arbitrary waveform on second channel (±10V range)
Video + DC (Non-Video) Specifies a configuration of normal video on the first channel and a DC-coupled arbitrary waveform on second channel (±10V range)
Error In describes error conditions that occur before this node runs. This input provides standard error in functionality.
Error Out contains error information. This output provides standard error out functionality.

Log in to get a better experience