Why Does USRP2 Appear Instead of the USRP Device in the NI-USRP Configuration Utility?
- Updated2024-04-26
- 1 minute(s) read
Why Does USRP2 Appear Instead of the USRP Device in the NI-USRP Configuration Utility?
- An incorrect IP address on the computer may cause this error. Check the IP address and run the NI-USRP Configuration Utility again.
- An old FPGA or firmware image on the device may also cause this error. Upgrade the FPGA and firmware using the NI-USRP Configuration Utility.