USRP-2901 Connectors and LEDs
- Updated2023-02-20
- 2 minute(s) read
USRP-2901 Connectors and LEDs
Connector | Use | |
---|---|---|
RF 0 | TX1 RX1 | Input and output terminal for the RF signal. TX1 RX1 is an SMA (f) connector with an impedance of 50 Ω and is a single-ended input or output channel. |
RX2 | Input terminal for the RF signal. RX2 is an SMA (f) connector with an impedance of 50 Ω and is a single-ended input channel. | |
RF 1 | RX2 | Input terminal for the RF signal. RX2 is an SMA (f) connector with an impedance of 50 Ω and is a single-ended input channel. |
TX1 RX1 | Input and output terminal for the RF signal. TX1 RX1 is an SMA (f) connector with an impedance of 50 Ω and is a single-ended input or output channel. |
LED | Description | Color | Indication | |
---|---|---|---|---|
RF 0 | TX1 RX1 | Indicates the transmit status of the device. | Off | The device is not active. |
Green | The device is receiving data. | |||
Red | The device is transmitting data. | |||
Orange | The device is switching between transmitting and receiving data. | |||
RX2 | Indicates the receive status of the device. | Off | The device is not active. | |
Green | The device is receiving data. | |||
RF 1 | RX2 | Indicates the receive status of the device. | Off | The device is not active. |
Green | The device is receiving data. | |||
TX1 RX1 | Indicates the transmit status of the device. | Off | The device is not active. | |
Green | The device is receiving data. | |||
Red | The device is transmitting data. | |||
Orange | The device is switching between transmitting and receiving data. |
Connector | Use |
---|---|
REF IN | Input terminal for an external reference signal for the local oscillator (LO) on the device. REF IN is a female SMA connector with an impedance of 50 Ω, and it is a single-ended reference input. REF IN accepts a 10 MHz signal with a minimum input power of 0 dBm (0.632 Vpk-pk) and a maximum input power of 15 dBm (3.56 Vpk-pk) for a square wave or sine wave. |
USB | Input that accepts a standard USB cable. A suitable USB cable is included in the hardware kit. |
PPS IN | Input terminal for pulse per second (PPS) timing reference. PPS IN is a female SMA connector with an impedance of 50 Ω, and it is a single-ended input channel. PPS IN accepts 0 V to 3.3 V TTL and 0 V to 5 V TTL signals. |
PWR | Input that accepts a 6 V, 3 A external DC power connector. |