Vertically Mounting the USB-6509 to a DIN Rail

Use the DIN rail mounting kit (part number 779689-01) to vertically mount the USB-6509 to a DIN rail.
  1. Fasten the DIN rail clip to the device using a #1 Phillips screwdriver and four thread-forming screws (part number 740872-01), included in the DIN rail mounting kit. Tighten the screws to a torque of 0.76 N · m (6.7 lb · in.).
    Note Using the thread-forming screws permanently affixes the DIN rail clip to the device. Unscrewing and reinstalling the thread-forming screws will produce a compromised connection between the DIN rail clip and the device.
    The following figure shows a DIN rail clip being attached to the device.
    Figure 15. Attaching the DIN Rail Clip to a Device in a Vertical Orientation

    1378

    1. Thread-Forming Screw (740872-01)
    2. DIN Rail Clip
    3. USB-6509
  2. Clip the device onto the DIN rail as the following figures show.
    Figure 16. DIN Rail Clip Parts Locator Diagram

    1378

    1. DIN Rail Clip
    2. DIN Rail Spring
    3. DIN Rail
    Figure 17. Device Mounted on a DIN Rail

    1378