The USB-6423 (OEM) has four screw holes, located in the corners, for mounting.

What to Use

  • USB-6423 (OEM)
  • 4-40 or M3 screws
  • Screwdriver

What to Do

  1. Place the USB-6423 (OEM) in position.
  2. Insert the screw through the screw holes and tighten them to secure the USB-6423 (OEM) in place. The following figure shows the locations of the mounting screw holes on the USB-6423 (OEM).
    Figure 118. USB-6423 (OEM) Screw Holes Locations


    1. Mounting screw holes

USB-6423 (OEM) Dimensions

Use the dimensions of the USB-6423 (OEM) to design your system configuration.

The following figure shows the dimensions of the USB-6423 (OEM). Unless otherwise specified, dimensions are in millimeters and [inches].

You can use the center location for the LEDs, USB connector, and grounding lug to integrate the USB-6423 (OEM) in a custom enclosure. The grounding lug is positioned to attach to a 2 mm thick (or thinner) panel to ensure that you can connect a USB cable without interference. The grounding lug ships with a 6-32 Phillips/Standard Slot combo screw pre-installed.

Figure 119. USB-6423 (OEM) Dimensions