TS-15200 Pinout
- Updated2022-09-12
- 1 minute(s) read
TS-15200 Pinout
| Signal Name | Description |
|---|---|
| Local+ | Output + |
| Local- (GND) | Output - |
| Remote+ | Sense + |
| Remote- | Sense - |
| VAUX | Auxiliary power input + (11 V to 28 V) |
| VAUX_GND | Auxiliary power input - |
| NC | No connection |
Notice Connect at least 4 Local+ and
4 Local- pins to avoid current overload conditions that could damage the cables or
module.
Notice When sourcing power through
the IO connector, please connect all VAUX and VAUX_GND pins to avoid current
overload conditions that could damage the cables or module.
Notice The module has no
safety isolation. Do not attempt to extend output power through cascading
channels.
Note A minimum capacitive load of 10 µF is recommended
to ensure output stability.
Note NI recommends using the TestScale cabling
accessories to connect the 10 total Local+ and 10 total Local- pins for the best
transient response behavior and to minimize the voltage drop at the load. Refer to
Recommended Cables and Accessories in the TestScale
Features manual for a list of available accessories.