SCB-100 IG Introduction

This document describes how to connect and use the SCB-100 with 100-pin data acquisition (DAQ) devices and lists specifications. The SCB-100 is a shielded I/O connector block with 100 screw terminals for easy signal connection to the following NI devices and modules:

  • Digital I/O (DIO)—NI 6508, NI 6509, NI 6511, NI 6512, NI 6513, NI 6514, NI 6515, NI 6527, NI 6528, NI 6529, PCI-DIO-96
  • Counter/Timer—NI 6624
  • Multifuntion I/O (MIO)—NI 6025E, NI 6031E, NI 6033E, NI 6071E
  • Other devices with a 100-pin0.050 series shielded D-type I/O connector
Note To use the SCB-100 with a digital I/O or counter/timer device, you must change the default switch setting. Refer to Using the SCB-100 with Digital I/O and Counter/Timer Devices for more information.
Figure 1. SCB-100 Parts Locator Diagram

1378

  1. Quick Reference Label (Optional)
  2. Top Cover
  3. Connector Screw
  4. Grounding Screw
  5. 100-Pin I/O Connector
  6. Enclosure Base
  7. Strain-Relief Bar
  8. Strain-Relief Screw
  9. SCB-100 Board Assembly