Events:Done Event Export Output Terminal Property
- Updated2025-02-03
- 2 minute(s) read
Events:Done Event Export Output Terminal Property
Short Name: DoneEvent.ExportOutputTerm
Property of niRFSG
Specifies the destination terminal for exporting the Done event. To set this property, the NI-RFSG device must be in the Configuration state.
Supported Devices: PXIe-5644/5645/5646, PXI-5670/5671, PXIe-5672/5673/5673E, PXIe-5820/5830/5831/5832/5840/5841/5842/5860
Related Topics
| Do not export signal () |
The signal is not exported. |
| PFI0 (PFI0) |
The signal is exported to the PFI 0 connector. |
| PFI1 (PFI1) |
The signal is exported to the PFI 1 connector. |
| PFI4 (PFI4) |
The signal is exported to the PFI 4 connector. |
| PFI5 (PFI5) |
The signal is exported to the PFI 5 connector. |
| PXI_Trig0 (PXI_Trig0) |
The signal is exported to the PXI trigger line 0. |
| PXI_Trig1 (PXI_Trig1) |
The signal is exported to the PXI trigger line 1. |
| PXI_Trig2 (PXI_Trig2) |
The signal is exported to the PXI trigger line 2. |
| PXI_Trig3 (PXI_Trig3) |
The signal is exported to the PXI trigger line 3. |
| PXI_Trig4 (PXI_Trig4) |
The signal is exported to the PXI trigger line 4. |
| PXI_Trig5 (PXI_Trig5) |
The signal is exported to the PXI trigger line 5. |
| PXI_Trig6 (PXI_Trig6) |
The signal is exported to the PXI trigger line 6. |
| PXIe_DStarC (PXIe_DStarC) |
The signal is exported to the PXIe DStar C trigger line. This value is valid on only the PXIe-5820/5830/5831/5832/5840/5841/5842/5860. |
| DIO\PFI0 (DIO\PFI0) |
The signal is exported to the PFI 0 on the DIO front panel connector |
| DIO\PFI1 (DIO\PFI1) |
The signal is exported to the PFI 1 on the DIO front panel connector |
| DIO\PFI2 (DIO\PFI2) |
The signal is exported to the PFI 2 on the DIO front panel connector |
| DIO\PFI3 (DIO\PFI3) |
The signal is exported to the PFI 3 on the DIO front panel connector |
| DIO\PFI4 (DIO\PFI4) |
The signal is exported to the PFI 4 on the DIO front panel connector |
| DIO\PFI5 (DIO\PFI5) |
The signal is exported to the PFI 5 on the DIO front panel connector |
| DIO\PFI6 (DIO\PFI6) |
The signal is exported to the PFI 6 on the DIO front panel connector |
| DIO\PFI7 (DIO\PFI7) |
The signal is exported to the PFI 7 on the DIO front panel connector |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | niRFSG Export Signal |
| Channel-based | No |
| Resettable | Yes |