Signal Path:Digital IF Equalization Enabled Property
- Updated2025-02-03
- 2 minute(s) read
Signal Path:Digital IF Equalization Enabled Property
Short Name: Digital IF Equalization Enabled
Property of niRFSA
Enables use of the digital equalization filter for the RF downconverter.
PXIe-5820/5830/5831/5832/5840/5841/5842/5860—The only valid value for this property is TRUE.
 |
Note For PXIe-5665/5667 devices, digital IF equalization is supported only with a 150 MHz clock. You cannot set this property to TRUE if the Digitizer Sample Clock Timebase Source property is set to LORefClk. |
|
Note For the PXIe-5665 (14 GHz)/5667 (7 GHz)/5668, the downconverter preselector is not part of the IF filter path, so NI-RFSA does not equalize the preselector distortions. |
Default Value: TRUE, if the device configuration is supported.
Supported Devices: PXI-5661, PXIe-5663/5663E/5665/5667/5668, PXIe-5820/5830/5831/5832/5840/5841/5842/5860
| TRUE | Enables digital IF equalization on the RF downconverter. |
| FALSE | Disables digital IF equalization on the RF downconverter. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Channel-based | No |
| Resettable | Yes |