NIRFSA_ATTR_CAL_IF_FILTER_SELECTION
- Updated2025-02-03
- 1 minute(s) read
NIRFSA_ATTR_CAL_IF_FILTER_SELECTION
Specific Attribute
| Data type |
Access | High Level Functions |
|---|---|---|
| ViInt32 | R/W | None |
Description
Specifies the IF filter path during calibration. The attribute is valid only during a calibration session.
Defined Values:| NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_1 (2100) | Specifies that the 5 MHz filter path is used during calibration. |
| NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_2 (2101) | Specifies that the 300 kHz filter path is used during calibration. Not supported for the PXIe-5694. |
| NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_3 (2102) | None of the IF filter paths are used during calibration. |
| NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_4 (2103) | Specifies that the 20 MHz filter path is used during calibration. |
| NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_5 (2104) | Specifies that the 1.4 MHz filter path is used during calibration. |
| NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_6 (2105) | Specifies that the 400 kHz filter path is used during calibration. |
| NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_7 (2106) | Specifies that the 110 kHz filter path is used during calibration. |
| NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_8 (2107) | Specifies that the 30 kHz filter path is used during calibration. |
Default Value: NIRFSA_VAL_EXT_CAL_IF_FILTER_PATH_4
Supported Devices: PXIe-5694