niRFSA_CreateDeembeddingSparameterTableS2PFile
- Updated2025-02-03
- 2 minute(s) read
niRFSA_CreateDeembeddingSparameterTableS2PFile
ViStatus niRFSA_CreateDeembeddingSparameterTableS2PFile (ViSession vi, ViConstString port, ViConstString tableName, ViConstString s2pFilePath, ViInt32 sparameterOrientation);
Purpose
Creates an S-parameter de-embedding table for the port based on the specified S2P file.
If you only create one table for a port, NI-RFSA automatically selects that table to de-embed the measurement.
Supported Devices: PXIe-5830/5831/5832/5840/5841/5842/5860
Related Topics
Parameters
| Input | ||||||
| Name | Type | Description | ||||
| vi | ViSession | Identifies your instrument session. vi is obtained from the niRFSA_init or niRFSA_InitWithOptions function. | ||||
| port | ViConstString | Specifies the name of the port. The only valid value for the PXIe-5840/5841/5842/5860 is "" (empty string). | ||||
| tableName | ViConstString | Specifies the name of the table. The name must be unique for a given port, but not across ports. If you use the same name as an existing table, the table is replaced. | ||||
| s2pFilePath | ViConstString | Specifies the path to the S2P file that contains de-embedding information for the specified port. | ||||
| sparameterOrientation | ViInt32 | Specifies the orientation of the data in the S2P file relative to the port on the DUT port.
|
||||
Return Value
| Name | Type | Description | ||||||||
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an NI-RFSA function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the niRFSA_GetError function. To clear the error information from NI-RFSA, call the niRFSA_ClearError function. The general meaning of the status code is as follows:
|
||||||||