niRFSA_ConfigurePXIChassisClk10
- Updated2025-02-03
- 2 minute(s) read
niRFSA_ConfigurePXIChassisClk10
ViStatus niRFSA_ConfigurePXIChassisClk10(ViSession vi, ViConstString pxiClk10Source);
Purpose
Specifies the signal to drive the 10 MHz Reference Clock on the PXI backplane. This option can be configured only when the PXI-5600 is installed in the Star Trigger Controller Slot, also known as the System Timing Slot, of the PXI chassis.
Supported Devices: PXI-5600 (external digitizer mode), PXI-5661
Related Topics
Parameters
| Input | ||||||||
| Name | Type | Description | ||||||
| vi | ViSession | Identifies your instrument session. vi is obtained from the niRFSA_init or niRFSA_InitWithOptions function. | ||||||
| pxiClk10Source | ViConstString | Specifies the signal to drive the 10 MHz Reference Clock on the PXI backplane. This option can only be configured when the PXI-5600 is in Slot 2 of the PXI chassis.
|
||||||
Return Value
| Name | Type | Description | ||||||||
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an NI-RFSA function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the niRFSA_GetError function. To clear the error information from NI-RFSA, call the niRFSA_ClearError function. The general meaning of the status code is as follows:
|
||||||||