niRFSA_ConfigureDeembeddingTableInterpolationNearest
- Updated2025-02-03
- 1 minute(s) read
niRFSA_ConfigureDeembeddingTableInterpolationNearest
ViStatus niRFSA_ConfigureDeembeddingTableInterpolationNearest (ViSession vi, ViConstString port, ViConstString tableName);
Purpose
Selects the nearest interpolation method. NI-RFSA uses the parameters of the table nearest to the carrier frequency for de-embedding.
Supported Devices: PXIe-5830/5831/5832/5840/5841/5842/5860
Parameters
| Input | ||
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niRFSA_init or niRFSA_InitWithOptions function. |
| port | ViConstString | Specifies the name of the port. The only valid value for the PXIe-5840/5841/5842/5860 is "" (empty string). |
| tableName | ViConstString | Specifies the name of the table. |
Return Value
| Name | Type | Description | ||||||||
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an NI-RFSA function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the niRFSA_GetError function. To clear the error information from NI-RFSA, call the niRFSA_ClearError function. The general meaning of the status code is as follows:
|
||||||||