niRFSA_CheckAcquisitionStatus
- Updated2025-05-22
- 1 minute(s) read
niRFSA_CheckAcquisitionStatus
ViStatus niRFSA_CheckAcquisitionStatus(ViSession vi, ViBoolean* isDone);
Purpose
Checks the status of the acquisition. Use this function to check for any errors that may occur during signal acquisition or to check whether the device has completed the acquisition operation.
Supported Devices: PXIe-5644/5645/5646, PXI-5661, PXIe-5663/5663E/5665/5667/5668, PXIe-5694/5698, PXIe-5820/5830/5831/5832/5840/5841/5842/5860
Related Topics
NI RF Vector Signal Analyzer State Diagram
Parameters
| Input | ||||||
| Name | Type | Description | ||||
| vi | ViSession | Identifies your instrument session. vi is obtained from the niRFSA_init or niRFSA_InitWithOptions function. | ||||
| Output | ||||||
| Name | Type | Description | ||||
| isDone | ViBoolean* | Returns signal acquisition status.
|
||||
Return Value
| Name | Type | Description | ||||||||
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an NI-RFSA function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the niRFSA_GetError function. To clear the error information from NI-RFSA, call the niRFSA_ClearError function. The general meaning of the status code is as follows:
|
||||||||