niRFSA_ChangeExtCalPassword
- Updated2025-02-03
- 1 minute(s) read
niRFSA_ChangeExtCalPassword
ViStatus niRFSA_ChangeExtCalPassword(ViSession vi, ViConstString oldPassword, ViConstString newPassword);
Purpose
Changes the password that is required to initialize an external calibration session.
Supported Devices: PXIe-5601/5603/5605/5606, PXIe-5693/5694/5698, PXIe-5820/5830/5831/5832/5840/5841/5842/5860
Parameters
| Input | ||
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niRFSA_init or niRFSA_InitWithOptions function and identifies a particular instrument session. |
| ViConstString | oldPassword | Specifies the old (current) external calibration password. |
| ViConstString | newPassword | Specifies the new (desired) external calibration password.
The maximum length of the password varies by device. |
Return Value
| Name | Type | Description | ||||||||
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an NI-RFSA function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the niRFSA_GetError function. To clear the error information from NI-RFSA, call the niRFSA_ClearError function. The general meaning of the status code is as follows:
|
||||||||