Specifies the duration of the signal to be acquired for the PowerRamp measurement. This value is expressed in seconds.

Syntax

RFMXWLAN_ATTR_POWERRAMP_ACQUISITION_LENGTH

Numeric Value

Data Type

Access

Applies To

10493964

float64

Read/Write

N/A

Remarks


You must set this to a value that is greater than or equal to the duration of the PPDU under analysis, so that the acquired signal contains both rising and falling power ramp transitions.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is 1 millisecond.