RFmxWCDMA SEM Fetch Total Carrier Power VI

Selector String specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

Example:

"signal::sig1"

"result::r1"

"signal::sig1/result::r1"

You can use the RFmxWCDMA Build Signal String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the time for which the VI waits for the measurement to complete. This value is expressed in seconds. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

Total Carrier Power returns the sum of all active carrier powers, where each carrier power corresponds to the value of the SEM Results Carrier Abs Pwr property. This value is expressed in dBm. For a single-carrier measurement, total carrier power is the same as carrier absolute power.

error out contains error information. This output provides standard error out functionality.