Fetches an array of absolute powers and array of relative powers of the carriers for the CHP measurement. The relative power is relative to the total carrier power.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

    Example:

    "signal::sig1"

    "result::r1"

    "signal::sig1/result::r1"

    You can use the RFmxWCDMA Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the time for which the VI waits for the measurement to complete. This value is expressed in seconds. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • i1ddbl.png Absolute Power (dBm) —

    Absolute Power returns an array of carrier powers integrated over a bandwidth of 5 MHz. This value is expressed in dBm.

  • i1ddbl.png Relative Power (dB) —

    Relative Power returns an array of carrier powers relative to the CHP Results Total Carrier Pwr property. This value is expressed in dB.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.