Use the VIs on this palette to configure RFmxWCDMA measurements. You can use the RFmxWCDMA Property Node to configure additional properties.

RFmxWCDMA Configure RF VI
Configures the RF properties of the signal specified by the selector string.
RFmxWCDMA Configure Frequency VI
Configures the RF center frequency directly or by using the UTRA absolute radio frequency channel number (UARFCN) and band.
RFmxWCDMA Configure Reference Level VI
Configures the reference level, which represents the maximum expected power of an RF input signal.
RFmxWCDMA Auto Level VI
Examines the input signal to calculate the peak power level and sets it as the value of the Reference Level property. Use this VI to help calculate an approximate setting for the reference level.
RFmxWCDMA Configure External Attenuation VI
Configures the external attenuation.
RFmxWCDMA Configure Trigger VI
Configures the Reference Trigger you use to acquire the signal.
RFmxWCDMA Send Software Edge Trigger VI
Sends a trigger to the device when you use the RFmxWCDMA Configure Trigger VI to choose a software version of a trigger and the device is waiting for the trigger to be sent. You can also use this VI to override a hardware trigger.
RFmxWCDMA Configure Number of Carriers VI
Configures the number of carriers for ACP, CHP, OBW, SEM, and ModAcc measurements.
RFmxWCDMA Configure Carrier Frequency VI
Configures the center frequency of the carrier, relative to the RF center frequency.
RFmxWCDMA Configure Contiguous Carriers VI
Configures the contiguous carriers based on the number of carriers and the carrier at the center frequency.
RFmxWCDMA Configure Band VI
Configures the Universal Mobile Telecommunications System (UMTS) operating band.
RFmxWCDMA Configure Channel Configuration Mode VI
Configures the channel configuration mode.
RFmxWCDMA Configure Uplink Test Model VI
Configures the uplink test model.
RFmxWCDMA Configure Number of Channels VI
Configures the number of user-defined channels for the measurement. This VI is used when you set the Channel Configuration Mode property to User Defined. Call this VI before you call the RFmxWCDMA Configure User Defined Channel (Array) VI or the RFmxWCDMA Configure User Defined Channel VI.
RFmxWCDMA Configure User Defined Channel VI
Configures the spreading factor, spreading code, modulation type, and branch of each user-defined channel. Before calling this VI, you must configure the Num Channels property with the appropriate number of channels.
RFmxWCDMA Configure Uplink Scrambling VI
Configures the uplink scrambling type and the scrambling code.
Array VIs
Use the VIs on this palette to configure array VIs. You can also use the RFmxWCDMA Property Node to configure additional properties.
RFmxWCDMA Build Signal String VI
Creates selector string for use with configuration or fetch properties and VIs.
RFmxWCDMA Build Carrier String VI
Creates the carrier string to use as the selector string with the SEM and ACP carrier configuration or fetch VIs, properties, and results.
RFmxWCDMA Build Channel String VI
Creates the channel string to use as the selector string with the channel configuration and results.
ModAcc
Use the VIs on this palette to configure ModAcc measurements. You can also use the RFmxWCDMA Property Node to configure additional properties.
ACP
Use the VIs on this palette to configure ACP measurements. You can use the RFmxWCDMA Property Node to configure additional properties.
CHP
Use the VIs on this palette to configure CHP measurements. You can also use the RFmxWCDMA Property Node to configure additional properties.
OBW
Use the VIs on this palette to configure OBW measurements. You can also use the RFmxWCDMA Property Node to configure additional properties.
SEM
Use the VIs on this palette to configure spectral emission mask (SEM) measurements. You can also use the RFmxWCDMA Property Node to configure additional properties.
QEVM
Use the VIs on this palette to configure QEVM measurements. You can also use the RFmxWCDMA Property Node to configure additional properties.
SlotPhase
Use the VIs on this palette to configure SlotPhase measurements. You can also use the RFmxWCDMA Property Node to configure additional properties.
CDA
Use the VIs on this palette to configure CDA measurements. You can also use the RFmxWCDMA Property Node to configure additional properties.
SlotPower
Use the VIs on this palette to configure SlotPower measurements. You can also use the RFmxWCDMA Property Node to configure additional properties.

Parent topic: WCDMA

RFmx WCDMA LabVIEW Reference

Log in to get a better experience