NationalInstruments.RFmx.WcdmaMX
- Updated2025-10-13
- 6 minute(s) read
Classes
| Name | Description |
|---|---|
| RFmxWcdmaMX | Defines a root class which is used to identify and control WCDMA signal configuration. |
| RFmxWcdmaMXAcp | Represents the ACP measurement. |
| RFmxWcdmaMXAcpConfiguration | Provides methods to configure the ACP measurement. |
| RFmxWcdmaMXAcpResults | Provides methods to fetch and read the ACP measurement results. |
| RFmxWcdmaMXCda | Represents the CDA measurement. |
| RFmxWcdmaMXCdaConfiguration | Provides methods to configure the CDA measurement. |
| RFmxWcdmaMXCdaResults | Provides methods to fetch and read the CDA measurement results. |
| RFmxWcdmaMXChp | Represents the CHP measurement. |
| RFmxWcdmaMXChpConfiguration | Provides methods to configure the CHP measurement. |
| RFmxWcdmaMXChpResults | Provides methods to fetch and read the CHP measurement results. |
| RFmxWcdmaMXConstants | Specifies constants for I/O terminals. |
| RFmxWcdmaMXModAcc | Represents the ModAcc measurement. |
| RFmxWcdmaMXModAccConfiguration | Provides methods to configure the ModAcc measurement. |
| RFmxWcdmaMXModAccResults | Provides methods to fetch and read the ModAcc measurement results. |
| RFmxWcdmaMXObw | Represents the OBW measurement. |
| RFmxWcdmaMXObwConfiguration | Provides methods to configure the OBW measurement. |
| RFmxWcdmaMXObwResults | Provides methods to fetch and read the OBW measurement results. |
| RFmxWcdmaMXQevm | Represents the QEVM measurement. |
| RFmxWcdmaMXQevmConfiguration | Provides methods to configure the QEVM measurement. |
| RFmxWcdmaMXQevmResults | Provides methods to fetch and read the QEVM measurement results. |
| RFmxWcdmaMXSem | Represents the SEM measurement. |
| RFmxWcdmaMXSemConfiguration | Provides methods to configure the SEM measurement. |
| RFmxWcdmaMXSemResults | Provides methods to fetch and read the SEM measurement results. |
| RFmxWcdmaMXSlotPhase | Represents the SlotPhase measurement. |
| RFmxWcdmaMXSlotPhaseConfiguration | Provides methods to configure the SlotPhase measurement. |
| RFmxWcdmaMXSlotPhaseResults | Provides methods to fetch and read the SlotPhase measurement results. |
| RFmxWcdmaMXSlotPower | Represents the SlotPower measurement. |
| RFmxWcdmaMXSlotPowerConfiguration | Provides methods to configure the SlotPower measurement. |
| RFmxWcdmaMXSlotPowerResults | Provides methods to fetch and read the SlotPower measurement results. |
| RFmxWcdmaMXSubObject | Represents members that are common to all sub-object of RFmxWcdmaMX classes. |
Interfaces
None
Structures
None
Enumerations
| Name | Description |
|---|---|
| RFmxWcdmaMXAcpAmplitudeCorrectionType | Specifies whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at the RF center frequency, or at the individual frequency bins. Use the RFmxInstr_CfgExternalAttenuation function to configure the external attenuation table. |
| RFmxWcdmaMXAcpAveragingEnabled | Specifies whether to enable averaging for the ACP measurement. |
| RFmxWcdmaMXAcpAveragingType | Specifies the averaging type for averaging the spectrum of multiple acquisitions. The averaged spectrum is used for ACP measurement. |
| RFmxWcdmaMXAcpFftOverlapMode | Specifies how overlapping is applied when computing the FFT of the acquired samples. The default value is Disabled. |
| RFmxWcdmaMXAcpIFOutputPowerOffsetAuto | Specifies whether the measurement computes an IF output power level offset for the offset channels to improve the dynamic range of the ACP measurement. |
| RFmxWcdmaMXAcpMeasurementMethod | Specifies the method for performing the ACP measurement. |
| RFmxWcdmaMXAcpNoiseCompensationEnabled | Specifies whether to enable compensation of the channel powers for the inherent noise floor of the signal analyzer. |
| RFmxWcdmaMXAcpOffsetPowerReferenceCarrier | Specifies the carrier used as the power reference to measure the offset channel relative power. |
| RFmxWcdmaMXAcpRbwAutoBandwidth | Specifies whether the measurement computes the RBW. |
| RFmxWcdmaMXAcpRbwFilterType | Specifies the shape of the digital RBW filter. |
| RFmxWcdmaMXAcpSweepTimeAuto | Specifies whether the measurement computes the sweep time. |
| RFmxWcdmaMXBranch | Specifies the branch on which the data is modulated in the channel. |
| RFmxWcdmaMXCdaIQOffsetRemovalEnabled | Specifies whether to remove the I/Q offset before the CDA measurement. |
| RFmxWcdmaMXCdaMeasurementChannelBranch | Specifies the branch of the measurement channel. This value is used to compute the symbol results of the CDA measurement. |
| RFmxWcdmaMXCdaMeasurementChannelModulationType | Specifies the modulation type of the measurement channel. This value is used to compute the symbol results of the CDA measurement. |
| RFmxWcdmaMXCdaPowerUnit | Specifies the measurement unit of all power results, except GetTotalPower(string, out double). |
| RFmxWcdmaMXCdaRrcFilterEnabled | Specifies whether to enable the RRC filter. Use this method to disable the filter if the received signal is already RRC-filtered. |
| RFmxWcdmaMXCdaSpectrumInverted | Specifies whether the spectrum of the signal is inverted. |
| RFmxWcdmaMXCdaSynchronizationMode | Specifies whether the measurement is performed from the frame, slot, or symbol boundary. |
| RFmxWcdmaMXChannelConfigurationMode | Specifies the channel configuration mode. |
| RFmxWcdmaMXChpAmplitudeCorrectionType | Specifies whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at the RF center frequency, or at the individual frequency bins. Use the RFmxInstr_CfgExternalAttenuation function to configure the external attenuation table. |
| RFmxWcdmaMXChpAveragingEnabled | Specifies whether to enable averaging for the CHP measurement. |
| RFmxWcdmaMXChpAveragingType | Specifies the averaging type for averaging the spectrum of multiple acquisitions. |
| RFmxWcdmaMXChpRbwAutoBandwidth | Specifies whether the measurement computes the RBW. |
| RFmxWcdmaMXChpRbwFilterType | Specifies the shape of the digital RBW filter. |
| RFmxWcdmaMXChpSweepTimeAuto | Specifies whether the measurement computes the sweep time. |
| RFmxWcdmaMXDigitalEdgeTriggerEdge | Specifies the active edge for the trigger. |
| RFmxWcdmaMXIQPowerEdgeTriggerLevelType | Specifies the reference for the SetIQPowerEdgeTriggerLevel(string, double) method. |
| RFmxWcdmaMXIQPowerEdgeTriggerSlope | Specifies whether the device asserts the trigger when the signal power is rising or when it is falling. |
| RFmxWcdmaMXLimitedConfigurationChange | Specifies the set of properties that are considered by RFmx in the locked signal configuration state. |
| RFmxWcdmaMXLinkDirection | Specifies the direction for which the frequency is calculated. |
| RFmxWcdmaMXMeasurementTypes | Specifies the type of measurement. |
| RFmxWcdmaMXModAccDetectedBranch | Returns the branch of the detected channel. |
| RFmxWcdmaMXModAccDetectedModulationType | Returns the modulation type of the detected channel. |
| RFmxWcdmaMXModAccIQGainImbalanceRemovalEnabled | Specifies whether to remove I/Q gain imbalance before the ModAcc Measurement. |
| RFmxWcdmaMXModAccIQOffsetRemovalEnabled | Specifies whether to remove the I/Q offset before the ModAcc measurement. |
| RFmxWcdmaMXModAccIQQuadratureErrorRemovalEnabled | Specifies whether to remove the I/Q quadrature error before the ModAcc measurement. |
| RFmxWcdmaMXModAccPeakActiveCdeBranch | Returns the branch of the channel corresponding to the value of the GetPeakActiveCde(string, out double) method for a carrier. |
| RFmxWcdmaMXModAccPeakCdeBranch | Returns the branch corresponding to the value of the GetPeakCde(string, out double) method. |
| RFmxWcdmaMXModAccPeakRcdeBranch | Returns the branch of the channel corresponding to the value of the GetPeakRcde(string, out double) method for a carrier. |
| RFmxWcdmaMXModAccRrcFilterEnabled | Specifies whether to enable the RRC filter. Use this method to disable the filter if the received signal is already RRC-filtered. |
| RFmxWcdmaMXModAccSpectrumInverted | Specifies whether the spectrum of the signal is inverted. |
| RFmxWcdmaMXModAccSynchronizationMode | Specifies whether the measurement is performed from the frame, slot, or symbol boundary. |
| RFmxWcdmaMXModAccTransientRemovalEnabled | Specifies whether the measurement excludes 25 microseconds from the start and end of each slot while computing the RMS EVM, peak EVM, RMS magnitude error and RMS phase error results. |
| RFmxWcdmaMXModulationType | Specifies the modulation type for the channel. |
| RFmxWcdmaMXObwAmplitudeCorrectionType | Specifies whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at the RF center frequency, or at the individual frequency bins. Use the RFmxInstr_CfgExternalAttenuation function to configure the external attenuation table. |
| RFmxWcdmaMXObwAveragingEnabled | Specifies whether to enable averaging for the OBW measurement. |
| RFmxWcdmaMXObwAveragingType | Specifies the averaging type for averaging multiple spectrum acquisitions. The averaged spectrum is used for the OBW measurement. |
| RFmxWcdmaMXObwRbwAutoBandwidth | Specifies whether the measurement computes the RBW. |
| RFmxWcdmaMXObwRbwFilterType | Specifies the shape of the digital RBW filter. |
| RFmxWcdmaMXObwSweepTimeAuto | Specifies whether the measurement computes the sweep time. |
| RFmxWcdmaMXPropertyId | Specifies all the attribute identifiers. |
| RFmxWcdmaMXQevmAveragingEnabled | Specifies whether to enable averaging for the QEVM measurement. |
| RFmxWcdmaMXQevmIQOffsetRemovalEnabled | Specifies whether to remove the I/Q offset before the QEVM measurement. |
| RFmxWcdmaMXQevmRrcFilterEnabled | Specifies whether to enable the RRC filter. Use this method to disable the filter if the received signal is already RRC-filtered. |
| RFmxWcdmaMXQevmSpectrumInverted | Specifies whether the spectrum of the signal is inverted. |
| RFmxWcdmaMXSemAmplitudeCorrectionType | Specifies whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at the RF center frequency, or at the individual frequency bins. Use the RFmxInstr_CfgExternalAttenuation function to configure the external attenuation table. |
| RFmxWcdmaMXSemAveragingEnabled | Specifies whether to enable averaging for the SEM measurement. |
| RFmxWcdmaMXSemAveragingType | Specifies the averaging type for averaging multiple spectrum acquisitions. |
| RFmxWcdmaMXSemLowerOffsetMeasurementStatus | Indicates the measurement status based on the GetLowerOffsetMargin(string, out double) method. |
| RFmxWcdmaMXSemMeasurementStatus | Indicates the overall SEM measurement status, based on the value of the NationalInstruments.RFmx.WcdmaMX.RFmxWcdmaMXSemResults.GetLowerOffsetMeasurementStatus(string,NationalInstruments.RFmx.WcdmaMX.RFmxWcdmaMXSemLowerOffsetMeasurementStatus@) and the NationalInstruments.RFmx.WcdmaMX.RFmxWcdmaMXSemResults.GetUpperOffsetMeasurementStatus(string,NationalInstruments.RFmx.WcdmaMX.RFmxWcdmaMXSemUpperOffsetMeasurementStatus@) properties. |
| RFmxWcdmaMXSemOffsetRbwFilterType | Returns the shape of the digital RBW filter. |
| RFmxWcdmaMXSemSweepTimeAuto | Specifies whether the measurement computes the sweep time. |
| RFmxWcdmaMXSemUpperOffsetMeasurementStatus | Indicates the measurement status based on the GetUpperOffsetMargin(string, out double) method. |
| RFmxWcdmaMXSlotPhaseRrcFilterEnabled | Specifies whether to enable the RRC filter. Use this method to disable the filter if the received signal is already RRC-filtered. |
| RFmxWcdmaMXSlotPhaseSpectrumInverted | Specifies whether the signal spectrum is inverted. |
| RFmxWcdmaMXSlotPhaseSynchronizationMode | Specifies whether the measurement is performed from the frame or the slot boundary. |
| RFmxWcdmaMXSlotPhaseTransientRemovalEnabled | Specifies whether the SlotPhase measurement excludes 25 microseconds from the start and end of each slot while computing the linear-fit chip phase error, which is used to compute phase discontinuities at the slot boundaries. |
| RFmxWcdmaMXSlotPowerRrcFilterEnabled | Specifies whether to enable the RRC filter. |
| RFmxWcdmaMXSlotPowerSpectrumInverted | Specifies whether the spectrum of the signal is inverted. |
| RFmxWcdmaMXSlotPowerSynchronizationMode | Specifies whether the measurement is performed from the frame or slot boundary. |
| RFmxWcdmaMXTransmitterArchitecture | Specifies the RF architecture at the transmitter for a multicarrier signal. |
| RFmxWcdmaMXTriggerMinimumQuietTimeMode | Specifies whether the measurement computes the minimum quiet time used for triggering. |
| RFmxWcdmaMXTriggerType | Specifies the trigger type. |
| RFmxWcdmaMXUplinkScramblingType | Specifies the type of scrambling to use for the measurement. |
| RFmxWcdmaMXUplinkTestModel | Specifies the uplink test model when the user sets the SetChannelConfigurationMode(string, RFmxWcdmaMXChannelConfigurationMode) method to TestModel. |
Delegates
None