Configures the physical channel to be analyzed using the Spreading Factor parameter and the Channelization Code parameter.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Examples:

    ""

    "signal::sig1"

    You can use the RFmxTDSCDMA Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Spreading Factor —

    Spreading Factor specifies the base spreading factor for code domain power (CDP) analysis. The default value is 16.

  • ci32.png Channelization Code —

    Channelization Code specifies the channelization code of the code domain analysis (CDA) measurement channel. The default value is 1. The valid values are 1 to 16.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out returns error information. This output provides standard error out functionality.