Use the VIs on this palette to configure RFmx TD-SCDMA measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.

RFmxTDSCDMA Configure RF VI
Configures the RF properties of the signal specified by the Selector String parameter.
RFmxTDSCDMA Configure Frequency VI
Configures the center frequency of the RF signal to acquire according to the Center Frequency value in Hz or according to the Channel Number. The signal analyzer tunes to this frequency.
RFmxTDSCDMA Configure Reference Level VI
Configures the reference level. The reference level represents the maximum expected power of an input RF signal.
RFmxTDSCDMA Auto Level VI
Examines the input signal to calculate the peak power level and sets it as the value of the Reference Level property. Use this VI to calculate an approximate setting for the reference level.
RFmxTDSCDMA Configure External Attenuation VI
Specifies external attenuation to be considered by RFmx TD-SCDMA measurements, such as the attenuation of a switch or cable connected to the signal analyzer RF IN connector.
RFmxTDSCDMA Configure Trigger VI
Configures the Reference Trigger that the signal analyzer uses to acquire the signal.
RFmxTDSCDMA Send Software Edge Trigger VI
Sends a trigger to the device when you use the RFmxTDSCDMA Configure Trigger VI to choose a software version of a trigger and the device is waiting for the trigger to be sent. You can also use this VI to override a hardware trigger.
RFmxTDSCDMA Configure Channel Configuration Mode VI
Configures RFmx TD-SCDMA to detect the channels automatically or to use a specified channel configuration.
RFmxTDSCDMA Configure Number of Channels VI
Configures the number of channels for the user-defined channel configuration when the channel configuration mode is set to User Defined.
RFmxTDSCDMA Configure User Defined Channel VI
Configures an individual user-defined channel when the channel configuration mode is set to User Defined.
RFmxTDSCDMA Configure User Defined Channel (Array) VI
Configures all user-defined channels when the channel configuration mode is set to User Defined.
RFmxTDSCDMA Configure Uplink Scrambling Code VI
Configures the scrambling code used for the uplink transmission.
RFmxTDSCDMA Configure Midamble Shift VI
Configures the Midamble Auto Detection Mode, Maximum Number of Users, and Midamble Shift parameters.
RFmxTDSCDMA Configure Pilot VI
Configures the pilot code of the TD-SCDMA signal.
RFmxTDSCDMA Build Signal String VI
Creates a selector string to use with configuration or fetch properties and VIs.
RFmxTDSCDMA Build Channel String VI
Creates a selector string to use with channel-specific configuration or fetch properties and VIs.
ModAcc
Use the VIs on this palette to configure ModAcc measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.
ACP
Use the VIs on this palette to configure adjacent channel power (ACP) measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.
CHP
Use the VIs on this palette to configure channel power (CHP) measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.
OBW
Use the VIs on this palette to configure occupied bandwidth (OBW) measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.
SEM
Use the VIs on this palette to configure spectral emission mask (SEM) measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.
CDA
Use the VIs on this palette to configure SlotPower measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.
PVT
Use the VIs on this palette to configure power versus time (PVT) measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.
SlotPower
Use the VIs on this palette to configure SlotPower measurements. You can use the RFmxTDSCDMA Property Node to configure additional properties.

Parent topic: TDSCDMA

RFmx TD-SCDMA LabVIEW Reference

Log in to get a better experience