Configures the measurement trace to be used by the marker.

Use "marker<n>" as the selector string to configure this VI.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and marker number. If you do not specify the signal name, the default signal instance is used.

    Example:

    "marker0"

    "signal::sig1/marker0"

    You can use the RFmxSpecAn Build Marker String2 VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Trace —

    Trace specifies the trace. The default value is Spectrum.

    ACP Spectrum (0)

    The marker uses the ACP spectrum trace.
    CCDF Gaussian Probabilities Trace (1)

    The marker uses the CCDF Gaussian probabilities trace.
    CCDF Probabilities Trace (2)

    The marker uses the CCDF probabilities trace.
    CHP Spectrum (3)

    The marker uses the CHP spectrum trace.
    FCnt Power Trace (4)

    The marker uses the FCnt power trace.
    OBW Spectrum (5)

    The marker uses the OBW spectrum trace.
    SEM Spectrum (6)

    The marker uses the SEM spectrum trace.
    Spectrum (7)

    The marker uses the Spectrum trace.
    TXP Power Trace (8)

    The marker uses the TXP power trace.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.