RFmxSpecAn DPD Configure Measurement Interval VI

Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

Example:

""

"signal::sig1"

You can use the RFmxSpecAn Build Signal String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Measurement Interval specifies the duration, in seconds, of the reference waveform considered for the measurement. When the reference waveform contains an idle duration, the measurement neglects the idle samples in the reference waveform leading up to the start of the first active portion of the reference waveform. The default value is 100E-6.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference of your RFmx session to the next VI.

error out contains error information. This output provides standard error out functionality.