Specifies the array of ohmic losses between the output port of the DUT and the input port of the analyzer, as a function of frequency. This value is expressed in dB. This loss is accounted for by the noise figure (NF) measurement when you set the NF Output Loss Comp Enabled property to True.

Specify the array of frequencies at which the losses were measured using the NF Output Loss Freq property.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

The default value is an empty array.

Remarks

The following table lists the characteristics of this property.

Short Name NF Output Loss (dB)
Data type c1ddbl.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes