Specifies the bandwidth of the resolution bandwidth (RBW) filter used to sweep the acquired signal, when you set the RFMXSPECAN_ATTR_SPECTRUM_RBW_FILTER_AUTO_BANDWIDTH attribute to False. This value is expressed in Hz.

Syntax

RFMXSPECAN_ATTR_SPECTRUM_RBW_FILTER_BANDWIDTH

Numeric Value

Data Type

Access

Applies To

1085452

float64

Read/Write

N/A

Remarks


You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is 10 kHz.