Specifies whether the noise figure (NF) measurement accounts for ohmic losses between the noise source and the input port of the DUT, excluding the losses that are common to calibration and the measurement steps for the Y-Factor method, which are specified by the RFMXSPECAN_ATTR_NF_Y_FACTOR_NOISE_SOURCE_LOSS attribute.

Syntax

RFMXSPECAN_ATTR_NF_DUT_INPUT_LOSS_COMPENSATION_ENABLED

Numeric Value

Data Type

Access

Applies To

1179665

int32

Read/Write

N/A

Remarks


You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is False.

Name

Value

Description

RFMXSPECAN_VAL_NF_DUT_INPUT_LOSS_COMPENSATION_ENABLED_FALSE

0 (0x0)

The NF measurement ignores the ohmic losses.

RFMXSPECAN_VAL_NF_DUT_INPUT_LOSS_COMPENSATION_ENABLED_TRUE

1 (0x1)

The NF measurement accounts for the ohmic losses.