Fetches the burst stability trace of the selected position.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

    Example:

    ""

    "signal::sig1"

    "result::r1"

    "signal::sig1/result::r1"

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout (s) specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of your RFmx session to the next VI.

  • icclst.png Pulse Amplitude Stability (dB) —

    Pulse Amplitude Stability (dB) returns the trace of pulse amplitude stability, in dB.

  • idbl.png x0 —

    x0 returns the start time, in seconds.

  • idbl.png dx —

    dx returns the sample duration, in seconds.

  • i1dsgl.png y —

    y returns the amplitude stability, in dB.

  • icclst.png Pulse Phase Stability (dB) —

    Pulse Phase Stability (dB) returns the trace of pulse phase stability, in dB.

  • idbl.png x0 —

    x0 returns the start time, in seconds.

  • idbl.png dx —

    dx returns the sample duration, in seconds.

  • i1dsgl.png y —

    y returns the phase stability, in dB.

  • icclst.png Pulse Total Stability (dB) —

    Pulse Total Stability (dB) returns the trace of pulse total stability, in dB.

  • idbl.png x0 —

    x0 returns the start time, in seconds.

  • idbl.png dx —

    dx returns the sample duration, in seconds.

  • i1dsgl.png y —

    y returns the total stability, in dB.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.