RFmxPulse_FetchMultipleMeasurementPointsStabilityTrace
- Updated2025-10-13
- 2 minute(s) read
Fetches the multiple measurement points stability trace.
Syntax
int32 __stdcall RFmxPulse_FetchMultipleMeasurementPointsStabilityTrace(niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64 *x0, float64 *dx, float32 pulseAverageAmplitudeStability[], float32 pulseAveragePhaseStability[], float32 pulseAverageTotalStability[], int32 arraySize, int32 *actualArraySize)
Parameters
| Name | Direction | Type | Description |
|---|---|---|---|
| instrumentHandle | [in] | niRFmxInstrHandle | This parameter specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr_Initialize function. |
| selectorString | [in] | char[] | This parameter specifies a Selector String comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string). Example: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" |
| timeout | [in] | float64 | This parameter specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete. The default value is 10. |
| x0 | [out] | float64 * | This parameter returns the start time of measurement window, in seconds. |
| dx | [out] | float64 * | This parameter returns the sample duration of measurement window, in seconds. |
| pulseAverageAmplitudeStability | [out] | float32[] | This parameter returns the average amplitude stability of multiple measurement points, in dB. |
| pulseAveragePhaseStability | [out] | float32[] | This parameter returns the average amplitude stability of multiple measurement points, in dB. |
| pulseAverageTotalStability | [out] | float32[] | This parameter returns the average amplitude stability of multiple measurement points, in dB. |
| arraySize | [in] | int32 | Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter. |
| actualArraySize | [out] | int32 * | Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0. |
Returns
Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.
To obtain a text description of the status code and additional information about the error condition, call the RFmxPulse_GetError function.
The general meaning of the status code is as follows:
Value | Meaning |
|---|---|
0 | Success |
Positive Values | Warnings |
Negative Values | Errors |