Specifies the coercion limit for the reference level for noise compensation. When you set ModAcc Meas Mode property to Measure and ModAcc Noise Comp Enabled property to True, the measurement attempts to read noise floor calibration data corresponding to the configured reference level.

You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.

If noise floor calibration data corresponding to the configured reference level is not found in the calibration database, the measurement attempts to read noise floor calibration data from the calibration database for any reference level in the range of the configured reference level plus the coercion limit you set for this property. The default value is 0.5.

Remarks

The following table lists the characteristics of this property.

Short Name ModAcc Noise Comp Ref Level Coercion Limit (dB)
Data type cdbl.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes