Fetches an array of the maximum value across averaging counts of the frequency error per slot for all slots within the measurement length. This value is expressed in Hz.
Use "carrier(k)" or "subblock(n)" or "subblock(n)/carrier(k)" as the selector string to read this result.

Syntax

Namespace: NationalInstruments.RFmx.NRMX

public int FetchFrequencyErrorPerSlotMaximumTrace(string selectorString, double timeout, ref AnalogWaveform< float > frequencyErrorPerSlotMaximum)

Parameters

NameTypeDescription
selectorStringstring

Specifies a selector string comprising of the result name, subblock number, and carrier number. If you do not specify the result name, the default result instance is used. Example:
"subblock0/carrier0"
"result::r1/subblock0/carrier0"
You can use the BuildCarrierString(string, int) method to build the selector string.

timeoutdouble

Specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete.

frequencyErrorPerSlotMaximumref AnalogWaveform< float >

Upon return, contains an array of the maximum value across averaging counts of the frequency error per slot for all slots within the measurement length. This value is expressed in Hz.

Returns

Returns the status code of this method. The status code either indicates success or describes a warning condition.