Fetches the recovered bits during EVM calculation. The bits of different slots in the measurement length are concatenated.
Use "carrier<k>" or "subblock<n>" or "subblock<n>/carrier<k>" as the selector string to read results from this function.

Syntax

int32 __stdcall RFmxNR_ModAccFetchPUSCHDemodulatedBits(niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, int8 bits[], int32 arraySize, int32 *actualArraySize)

Parameters

NameDirectionTypeDescription
instrumentHandle[in]niRFmxInstrHandle

This parameter specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr_Initialize function.

selectorString[in]char

This parameter specifies a Selector String comprising of the signal name, result name, subblock number, and carrier number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "subblock0/carrier0".
Example:
"subblock0/carrier0"
"signal::sig1/subblock0/carrier0"
"result::r1/subblock0/carrier0"
"signal::sig1/result::r1/subblock0/carrier0"
You can use the RFmxNR Build Carrier String function to build the selector string.

timeout[in]float64

This parameter specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete. The default value is 10.

bits[out]int8

This parameter returns an array of the recovered bits during EVM calculation.

arraySize[in]int32

Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter.

actualArraySize[out]int32 *

Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0.

Returns

Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxNR_GetError function.

The general meaning of the status code is as follows:

Value

Meaning

0

Success

Positive Values

Warnings

Negative Values

Errors