Configures the number of ENDC adjacent channels of the subblock.

Syntax

int32 __stdcall RFmxNR_ACPCfgNumberOfENDCOffsets(niRFmxInstrHandle instrumentHandle, char selectorString[], int32 numberOfENDCOffsets)

Parameters

NameDirectionTypeDescription
instrumentHandle[in]niRFmxInstrHandle

This parameter specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr_Initialize function.

selectorString[in]char

This parameter specifies a Selector String comprising of the signal name and the subblock number. If you do not specify the signal name, the default signal instance is used. The default is "subblock0".
Example:
"subblock0"
"signal::sig1/subblock0"
You can use the RFmxNR_BuildSubblockString function to build the selector string.

numberOfENDCOffsets[in]int32

This parameter specifies the number of ENDC adjacent channel offsets to be configured at offset positions. The default value is dependent on 3GPP specification.

Returns

Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred.

To obtain a text description of the status code and additional information about the error condition, call the RFmxNR_GetError function.

The general meaning of the status code is as follows:

Value

Meaning

0

Success

Positive Values

Warnings

Negative Values

Errors