Specifies the spectrum emission mask used in the measurement for uplink.

Syntax

RFMXNR_ATTR_SEM_UPLINK_MASK_TYPE

Numeric Value

Data Type

Access

Applies To

9469954

int32

Read/Write

N/A

Remarks


You must set the mask type to Custom to configure the custom offset masks. Refer to section 6.5.2 of the 3GPP 38.101 specification for more information about standard-defined mask types.

You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is General.

Name

Value

Description

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_GENERAL

0 (0x0)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.2-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification, Table 6.5.2.1-1 and 6.5A.2.1-1 in section 6.5.2 of the 3GPP TS 38.101-2 specification and Table 6.5B.2.1.1-1 in section 6.5B of the 3GPP TS 38.101-3 specification. In case of non-contiguous EN-DC consisting of at least one subblock with all E-UTRA carriers, for the E-UTRA subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.6.2.1.5-1, 6.6.2.1.5-2, 6.6.2.1A.1.5-1, and 6.6.2.1A.1.5-2 in section 6.6.2 of the 3GPP TS 36.521-1 specification.
If the band value is set to 46 or 96 or 102, the measurement selects the offset frequencies and limits for SEM as defined in Table 6.5F.2.2-1 in section 6.5F.2 of the 3GPP TS 38.101-1 Specification.
If the band value is set to NTN bands 254, 255 or 256, the measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.2.1 in section 6.5.2 of the 3GPP 38.101-5 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS35

1 (0x1)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.1-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification and Table 6.5B.2.1.2.1-1 in section 6.5B of the 3GPP TS 38.101-3 specification. In case of non-contiguous EN-DC consisting of at least one subblock with all E-UTRA carriers, for the E-UTRA subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.6.2.2.5.5-1 in section 6.6.2 of the 3GPP TS 36.521-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_CUSTOM

2 (0x2)

You need to configure the RFMXNR_ATTR_SEM_NUMBER_OF_OFFSETS, RFMXNR_ATTR_SEM_OFFSET_START_FREQUENCY, RFMXNR_ATTR_SEM_OFFSET_STOP_FREQUENCY,RFMXNR_ATTR_SEM_OFFSET_ABSOLUTE_LIMIT_START, RFMXNR_ATTR_SEM_OFFSET_ABSOLUTE_LIMIT_STOP, RFMXNR_ATTR_SEM_OFFSET_SIDEBAND, RFMXNR_ATTR_SEM_OFFSET_RBW_FILTER_BANDWIDTH, RFMXNR_ATTR_SEM_OFFSET_RBW_FILTER_TYPE, and RFMXNR_ATTR_SEM_OFFSET_BANDWIDTH_INTEGRAL attributes for each offset.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS03

3 (0x3)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.3-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification. In case of non-contiguous EN-DC consisting of at least one subblock with all E-UTRA carriers, for the E-UTRA subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.6.2.2.5.1-1 and 6.6.2.2.5.1-2 in section 6.6.2 of the 3GPP TS 36.521-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS04

4 (0x4)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.2-3 in section 6.5.2 of the 3GPP TS 38.101-1 specification. Subcarrier spacing can be configured through RFMXNR_ATTR_BANDWIDTH_PART_SUBCARRIER_SPACING attribute. Subcarrier spacing corresponding to first bandwidth part is used for computing mask. Transform precoding can be configured through RFMXNR_ATTR_PUSCH_TRANSFORM_PRECODING_ENABLED attribute. Transform precoding corresponding to first bandwidth part is used for computing mask. In case of non-contiguous EN-DC consisting of at least one subblock with all E-UTRA carriers, for the E-UTRA subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.6.2.2.3.2-3 in section 6.6.2 of the 3GPP TS 36.521-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS06

5 (0x5)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.4-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification. In case of non-contiguous EN-DC consisting of at least one subblock with all E-UTRA carriers, for the E-UTRA subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.6.2.2.5.3-1 and 6.6.2.2.5.3-2 in section 6.6.2 of the 3GPP TS 36.521-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS21

6 (0x6)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.3-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification. In case of non-contiguous EN-DC consisting of at least one subblock with all E-UTRA carriers, for the E-UTRA subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.6.2.2.5.1-1 and 6.6.2.2.5.1-2 in section 6.6.2 of the 3GPP TS 36.521-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS27

7 (0x7)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.8-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification. In case of intra-band contiguous CA consisting of at least one subblock with all NR carriers, for the NR subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.2A.2.3.2.1-1 in section 6.5A.2.3 of the 3GPP TS 38.101-1 specification. In case of non-contiguous EN-DC consisting of at least one subblock with all E-UTRA carriers, for the E-UTRA subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.6.2.2.3.4-1 in section 6.6.2 of the 3GPP TS 36.521-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS07

8 (0x8)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.4-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification. In case of non-contiguous EN-DC consisting of at least one subblock with all E-UTRA carriers, for the E-UTRA subblock, the measurement selects the offset frequencies and limits for the SEM, as defined in Table 6.6.2.2.5.3-1 and Table 6.6.2.2.5.3-2 in section 6.6.2 of the 3GPP TS 36.521-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS03U

9 (0x9)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.3-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS21_REL_17_ONWARDS

10 (0xa)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.9-1 in section 6.5.2 of the 3GPP TS 38.101-1 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS04N

11 (0xb)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.1-1 in section 6.5.2.3 of the 3GPP TS 38.101-5 specification.

RFMXNR_VAL_SEM_UPLINK_MASK_TYPE_NS05N

12 (0xc)

The measurement selects the offset frequencies and limits for SEM as defined in Table 6.5.2.3.2-1 in section 6.5.2.3 of the 3GPP TS 38.101-5 specification.