RFmxLTE SEM Configure Offset Bandwidth Integral VI

Selector String specifies a selector string comprising of the signal name, subblock number, and offset number. If you do not specify the signal name, the default signal instance is used.

Example:

"subblock0/offset0"

"signal::sig1/subblock0/offset0"

You can use the RFmxLTE Build Offset String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Offset BW Integral specifies the resolution of the spectrum to compare with the spectral mask limits as an integer multiple of the RBW. The default value is 1.

When you set this parameter to a value greater than 1, the measurement acquires the spectrum with a narrow resolution and then processes it digitally to get a wider resolution that is equal to the product of a bandwidth integral and a RBW.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

error out contains error information. This output provides standard error out functionality.