Returns the measurement.

Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to read this result.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name, result name, subblock number, and carrier number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "subblock0/carrier0".

    Example:

    "subblock0/carrier0"

    "signal::sig1/subblock0/carrier0"

    "result::r1/subblock0/carrier0"

    "signal::sig1/result::r1/subblock0/carrier0"

    You can use the RFmxLTE Build Carrier String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • idbl.png Burst Width (s) —

    Burst Width returns the width of the captured burst.

  • idbl.png Mean Absolute ON Power (dBm) —

    Mean Absolute ON Power returns the average power of the subframes within the captured burst, excluding a transient period of 20 μs at the beginning. This value is expressed in dBm.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ii32.png Measurement Status —

    Measurement Status returns the measurement status indicating whether the power before and after the burst is within the standard defined limit.

    Fail (0)

    Indicates that the measurement has failed.
    Pass (1)

    Indicates that the measurement has passed.
  • idbl.png Mean Absolute OFF Power Before (dBm) —

    Mean Absolute OFF Power Before returns the mean power in the segment before the captured burst. The segment is defined as one subframe prior to the burst for the FDD mode and 10 SCFDMA symbols prior to the burst for the TDD mode. This value is expressed in dBm.

  • idbl.png Mean Absolute OFF Power After (dBm) —

    Mean Absolute OFF Power After returns the mean power in the segment after the captured burst. This value is expressed in dBm.

    The segment is defined as one subframe long excluding a transient period of 20 μs at the beginning. This value is expressed in dBm.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.