Fetches the array of the physical sidelink shared channel (PSSCH) data symbols power and DMRS symbols power.

Use "subblock<n>" as the selector string to read results from this VI.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name, result name, and subblock number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "subblock0".

    Example:

    "subblock0"

    "signal::sig1/subblock0"

    "result::r1/subblock0"

    "signal::sig1/result::r1/subblock0"

    You can use the RFmxLTE Build Subblock String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • cdbl.png Timeout (s) —

    Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • i1ddbl.png PSSCH Mean Data Power (dBm) —

    PSSCH Mean Data Power returns the array of the mean value of the power calculated on the PSSCH data symbols over the slots specified by the ModAcc Meas Length property. This value is expressed in dBm.

  • i1ddbl.png PSSCH Mean DMRS Power (dBm) —

    PSSCH Mean DMRS Power returns the array of the mean value of the power calculated on the PSSCH DMRS symbols over the slots specified by the ModAcc Meas Length property. This value is expressed in dBm.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.