RFmxLTE ModAcc Fetch NPUSCH Symbol Power VI

Selector String specifies a selector string comprising of the signal name, result name, subblock number, and carrier number. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "subblock0/carrier0".

Example:

"subblock0/carrier0"

"signal::sig1/subblock0/carrier0"

"result::r1/subblock0/carrier0"

"signal::sig1/result::r1/subblock0/carrier0"

You can use the RFmxLTE Build Carrier String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

NPUSCH Mean Data Power returns the mean value of the power calculated on the narrowband physical uplink shared channel (NPUSCH) data symbols over the slots specified by the ModAcc Meas Length property.

This value is expressed in dBm.

NPUSCH Mean DMRS Power returns the mean value of the power calculated on the NPUSCH DMRS over the slots specified by the ModAcc Meas Length property.

This value is expressed in dBm.

error out contains error information. This output provides standard error out functionality.