Configures whether the cell ID is configured by the user or auto-detected by the measurement.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default is "" (empty string).

    Example:

    "signal::sig1"

    You can use the RFmxLTE Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Auto Cell ID Detection Enabled —

    Auto Cell ID Detection Enabled specifies whether to enable autodetection the of cell ID. If signal being measured does not contain primary and secondary sync signal (PSS/SSS), autodetection of the cell ID is not possible. The default value is True.

    False (0)

    The measurement uses the cell ID you configure.
    True (1)

    The measurement auto detects the cell ID.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.