RFmxLTE CHP Fetch Total Aggregated Power VI

Selector String specifies a selector string comprising of the signal name and the result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. The default value is "" (empty string).

Example:

"signal::sig1"

"result::r1"

"signal::sig1/result::r1"

You can use the RFmxLTE Build Signal String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Timeout specifies the timeout for fetching the specified measurement. This value is expressed in seconds. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the VI waits until the measurement is complete. The default value is 10.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

Total Aggregated Power returns the sum of powers of all the frequency bins over the integration bandwidth of subblock. This value includes the power in the inter-carrier gaps within a subblock, but it does not include the power in the subblock gaps.

When you set the ACP Pwr Units property to dBm, the parameter returns the total integrated power in dBm of all the active carriers measured. When you set the ACP Pwr Units property to dBm/Hz, the parameter returns the power spectral density in dBm/Hz based on the power in all the active carriers measured.

error out contains error information. This output provides standard error out functionality.