Configures the type of integration bandwidth (IBW), which selects one of the frequency ranges over which the CHP is measured.

Refer to the LTE Channel Power (CHP) topic for more information.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default is "" (empty string).

    Example:

    "signal::sig1"

    You can use the RFmxLTE Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • ci32.png Integration Bandwidth Type —

    Integration Bandwidth Type specifies the integration bandwidth (IBW) type used to measure the power of the acquired signal. Integration bandwidth is the frequency interval over which the power in each frequency bin is added to measure the total power in that interval. The default value is Signal Bandwidth.

    Signal Bandwidth (0)

    The IBW excludes the guard bands at the edges of the carrier or subblock from the power calculation.

    Channel Bandwidth (1)

    The IBW includes the guard bands at the edges of the carrier or subblock from the power calculation.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.