RFmxLTE ACP Configure Number of EUTRA Offsets VI

Selector String specifies a selector string comprising of the signal name and the subblock number. If you do not specify the signal name, the default signal instance is used. The default is "" (empty string).

Example:

"subblock0"

"signal::sig1/subblock0"

You can use the RFmxLTE Build Subblock String VI to build the selector string.

Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

Number of EUTRA Offsets specifies the number of E-UTRA adjacent channel offsets to be configured at offset positions, when you set the ACP Configurable Number of Offset Enabled property to True.

In case of non-contiguous carrier aggregation, the configured value will be used only for the outer offsets and the offset channels in the gap region are defined as per the 3GPP specification. Offset integration bandwidth and offset power reference for the outer E-UTRA offsets are set according to the value of ACP EUTRA Offset Definition property.

The default value is 0, when carrier bandwidth is 200 kHz. The default value is 2 for downlink and 1 for uplink, otherwise.

error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

Instrument Handle Out passes a reference to your RFmx session to the next VI.

error out contains error information. This output provides standard error out functionality.