Component Carrier:Uplink:PUSCH:Modulation Type
- Updated2025-04-08
- 1 minute(s) read
Specifies the modulation scheme used in the physical uplink shared channel (PUSCH) of the signal being measured.
Use "carrier<k>" or "subblock<n>/carrier<k>" as the selector string to configure or read this property.
The default value is QPSK.
Remarks
The following table lists the characteristics of this property.
| Short Name | PUSCH Mod Type |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | RFmxLTE Configure PUSCH Modulation Type, RFmxLTE Configure PUSCH Modulation Type |
| Resettable | Yes |
| QPSK | 0 | Specifies a QPSK modulation scheme. |
| 16 QAM | 1 | Specifies a 16-QAM modulation scheme. |
| 64 QAM | 2 | Specifies a 64-QAM modulation scheme. |
| 256 QAM | 3 | Specifies a 256-QAM modulation scheme. |
| 1024 QAM | 4 | Specifies a 1024-QAM modulation scheme. |